Preform Mould

Image
Image

24-cavity PET water carbonated beverage preform


1. Material: PET (100% natural mold material);

2. Neck size: 28mm PCO 1810 standard neck (neck height is 21.1mm);

3. Weight: 14g, 16g, 18g, 21g, 23g, 25g, 28g, 30g, 32g, 35g, 38g;

4. Color: transparent, blue, green, yellow, red, amber and any other colors are available; Uses: plastic mineral water bottles, plastic drinking water bottles, etc.;

5. Packing details: high-quality standard carton with pp bag inside;

6. Delivery time: 15 days per 40-foot container;

7. Sample: We can provide some samples for you to test.

projectnamedescribehardness
1templateP 20 28-32 
2Core cavityS13648-52
3Threaded mouthS13648-52
4cooling methodCore and neck cooling
5Cooling method for core plate and cavity plate1 in, 1 out
6Off-center (mm)+/-0.08mm
7Cycle time injection8-23 seconds
8delivery timeWithin 60 days after design confirmation

Image
  • Detailed introduction

24 cavity preform mould for the preform with PCO 1881 neck, is designed for the CSD drinks, the mold has balanced hot runner system with shut off valve gate, ensure there is no any stringing form on the injection gate of the perforCH. The cam roller design help the operator save the maintenance time of the molds. The PET preform mold is designed for CH injection molding system. The weight of the preforms is 23.5g, Cycle time is 24 Sec with general PET screw injection molding machine.

PET PREFORM MOULD SPECIFICATION
Mould name24 cavity preform mould for PCO 1881 Neck 23.5g Preform
Mould cavity24 cavity
Neck finishPCO 1881 CSD Neck finish
Preform weight23.5g
Insert materials2316 stain steel from German
Mould body#50 steel material
Cycle time24 sec with general PET screw type of injection molding machine
Cycle time with two stage injection system and Post cooling systemNot available
Hot runner designBalanced Hot runner with valve gate system
Suitable injection molding machinesHusky, Netstal PET line, PET Master, General PET injection molding machine